| Alatas’ Service | Field Service |
| Location | ASIA/ HONG KONG/ SAI KUNG |
| Equipment | Yacht Crane |
| Model | Hydraulic Yacht Crane Vermeer YCR-40 |
Intro
Customer followed Alatas’ recommendation to carry out an annual inspection and lubrication inside the boom of their Vermeer YCR-40 and asked Alatas Service team to do this job.
JOB SCOPE
- Disconnect the luffing cylinder
- Bypass the hydraulic system to bring the boom in horizontal position
- Dismantle the parking cylinder pin and connecting plates
- Remove the boom head
- Inspect inside the crane boom
- Report and repair any issue found
- Clean inside the boom and lubricate/grease trolley guide, sheaves, wire ropes, etc
- Re-install the boom head with newly supplied bolting and Torque at the required value
- Install back the hook block
- Lift the boom and connect back the parking cylinder, wire ropes, luffing cylinder
- Connect back the load cells
- Lubrication of the wire ropes
- Function tests
Vermeer YCR-40 Internal Boom Inspection gallery
