|TEKIRDAĞ/ EMEA/ TURKEY
|Container Feeder Vessel
The technicians from Alatas TR attended to the vessel to fix the problem of the luffing system. They checked the ends of the cables in the joystick electrical box and the communication cable and they cleaned and corrected them. And lastly, they tested the vessel and delivered it in working order.
Alatas TR was contacted for the troubleshooting of the luffing system. Alatas TR technicians traveled to Tekirdağ and after boarding the vessel they completed the necessary inspections and then fixed the problems.
After boarding the vessel, all checks were completed by Alatas technicians. The technicians observed some corrosion on the cables in the joystick electrical box. They cleaned, checked, and corrected all the cables.
FULL WORK SCOPE
- Firstly, Alatas TR technicians observed the problem area once they attended to the vessel. After the observation, the technicians found some corrosion on the ends of the cables in the joystick electrical box.
- Alatas technicians cleaned the cable ends and measured the resistance values of the joysticks. After that, they checked and corrected the communication cable between the output plc module and the drive module.
- The correct resistor values were found to be smooth by Alatas technicians.
- After the job was done, Alatas TR technicians tested the Crane with the vessel’s crew and delivered it in working condition.
Troubleshooting On The Luffing System In Tekirdağ Asya Port Gallery