Contact us

SMAG Grab Accident Repair

ALATAS’ SERVICEWORKSHOP REPAIR  
LOCATION  ASIA/SINGAPORE/SINGAPORE
EQUIPMENT  GRABS
BRANDPEINER SMAG MZGL-14000-6-B-S          

Intro

Customer off-landed 1x Grab No.3 [MZGL-14000-6-B-S] to Alatas workshop for inspection and complete refurbishment.

BACKGROUND

Alatas Service Team attends on-board for inspection. Found 1x Grab corroded and unable to be tested due to a damaged pin connector.

ALATAS’ SOLUTION

Grab off landed for repair to Alatas Workshop. The workshop team fully refurbished the grab to new condition.

JOB SCOPE

  • SMAG grab off-landed from the vessel
  • Alatas arranged sea & land transportation for the grab to be picked up from Vessel (at anchorage) and bring it over to our workshop.
  • Dismantled the grab completely
  • 2x Hydraulic cylinders overhauled
  • 1x E-Motor overhauled
  • 1x Pump overhauled
  • All hydraulic hoses replaced
  • Weld Repair of LH & RH Grab Scoops
  • In-situ machining on 2x Grab Scoop Hinge Seats
  • Complete grab re-assembled with new parts & overhauled components. Greased where required
  • Grab function tested. Grab fully closed/opened and able to hold. The results were found satisfactory.
  • Delivered repaired grab back to the vessel
SMAG Grab MZGL-14000-6-B-S, completely refurbished
Alatas arranged low bed trailer to transport the grab from port terminal to Alatas Workshop.
Grab off landed at Alatas Workshop.
Dismantling of the grab scoops in progress
4x badly worn out Hinge Pins
4x Steering Arm Lower pins badly corroded
Complete traverse unit removed from the scoops
Components: 2x Cylinders, 1x Pump,1x E-Motor & 1x Control Block to be removed and overhauled
Need to carryout weld repair works on both LH & RH Grab Scoops
1x Lot of Hydraulic hoses & fittings to replace
E-Motor & Pump overhauled. Hoses replaced.
2x Hydraulic Cylinders Overhauled & Pressure Tested
Upper Traverse assembled with overhauled components
Cut & replaced bucket’s side wall (2x) & re-use back side wall lip’s plates.
Grab assembly in progress
Bottom lips of grab scoops welded
Function test the Grab. Grab fully opened & closed, results found to be satisfactory. 
Grab delivered to vessel

Share Article

Recent Posts

Load More
Alatas Logo Red and Gray

We aim to provide you with top quality services and original spare parts as an alternative to the OEM.

We take care of your cranes.

Industries

Service Areas

Get Social

Facebook Twitter Linkedin Youtube

Need help, parts or repairs?

Contact us
Send us a Message

Copyright © 2023 Alatas. All rights reserved.

Scroll to Top