|Alatas’ Service||Field Service|
Alatas Turkey technicians traveled to Poland and attended the vessel for sheaf renewal. After they attended the vessel, they unloaded the ropes to remove the sheaves. They removed the sheaves’ pin and cleaned the pin. Then the technicians change the hoisting and luffing sheaves with new ones. And then they installed the sheaves group to the end of the jib and pushed the pin.
The client requested that Alatas Turkey replace the sheaves. The experts took care of the ship and completed all of the necessary tasks.
In order to complete the task of renewing sheaves, the specialists of Alatas Turkey performed some removal, cleaning, and renewal.
- The Technicians of Alatas Turkey traveled to Poland, and Gdansk and attended to the vessel.
- In the beginning, they awaited the jib to be in the removal position. To remove the sheaves, they first emptied the ropes, and then, using the chain block, they pulled the ropes. The sheaves were then taken off the jib’s top. Also taken off was the pin on the sheaves. The pin was later cleaned, and Alatas experts replaced the hoisting and luffing sheaves with new ones.
- The remaining work involved changing the luffing sheave’s bearing and installing the luffing sheave to pin. They also added the sheave groups to the jib’s end. The Alatas Turkey personnel used a hydraulic pump to finally press the pin.