|Alatas Service||Workshop Repairs|
|Crane Model||A4V250EL Hoist Pump|
Alatas has an extensive stock of various types of hydraulic pumps, motors, gearboxes and winches for all sorts of brands across various industries. These services were taken advantage of during this Rexroth A4V250EL hoist pump conversion.
Our UK Workshop facilities convert base units to nearly any specification required by the customer and typically, within short lead times. In addition to this service, we exchange units that allow customers to purchase units that are good as new, for less.
Job Report for Rexroth A4V250EL Hoist Pump Conversion
One of our clients took advantage of both of these services when the UK Alatas Workshop received a Rexroth A4V250EL hoist pump. The unit was for an offshore crane which urgently needed to be changed out due to a failure.
With the right Rexroth parts already in stock, our workshop experts used the offshore crane’s hydraulic schematic to configure the hydraulic setting of the pump on the testing rig.
After the Rexroth A4V250EL hoist pump was successfully converted, our Field Service department was sent to complete the changeout of the pump within the week of the customer’s request.