Content on this page requires a newer version of Adobe Flash Player.

Get Adobe Flash player

   
cce client portal
Alatas on Facebook Follow Alatas on Twitter Follow Alatas on Google Plus Alatas You Tube Channel Alatas Linkedin
 
Hydraulic pumps and motors
 

New hydraulic pumps and motors

Hydraulic motors Hydraulic pumps
Bearings O-rings
Rotary Groups Seals Valves
Valve blocks    


Hydraulic pump and motor refurbishments

Hydraulic pumps and motors can be repaired and refurbished.

State of the art hydraulic workshop
Only genuine parts are used
Units are tested to Manufacturers specifications
Units are supplied with warranty


Hydraulic testbed

The installed power of the pump test stand exceeds that required to test the largest hydraulic piston pumps manufactured to date. The unique 2 station system is fully independent and can test open and closed circuit pumps and motors, sizes ranging from  12cc/rev to 1000cc/rev of pressures up to 450bar.

The master control panel collates all the test information required via a 32 channel data acquisition system. The instrumentation system records 7 flows up to 100°C, 2 speeds up to 4000 rpm. 1 drive for Electro hydraulic pump controls, 1 power output in HP/KW and time. We can provide hard copy graphical test reports, showing overall performance and efficiencies.

Pump controls can be set to your specifications no matter how complex, including; horsepower regulated, load sensing, pressure compensated etc.

Hydraulic motor testbed

The motor test stand is based upon a hydrostatic dynamometer and is capable of testing units up to 250cc/rev or 1800Nm. The instrumentation on this stand includes flow, pressure, temperature, speed and output torque, combined with data recording equipment.

 

Hydraulic valve test rig

All hydraulic valve types can be tested and set to your specification on the valve test stand including electro-proportional, flapper-servo, electrical solenoid, hydraulic pilot, pneumatic and manual operation. The test rig has the mounting plates for all popular sizes ISO, DIN. And CETOP standards, for both directional and relief/reducing valve types.

All hydraulic valve types can be tested and set to your specification on the valve test stand including electro-proportional, flapper-servo, electrical solenoid, hydraulic pilot, pneumatic and manual operation. The test rig has the mounting plates for all popular sizes ISO, DIN. And CETOP standards, for both directional and relief/reducing valve types.

Hydraulic pump and motor service exchange program

Alatas offers a range of service exchange hydraulic pumps and motors, which are fully tested and ready to be dispatched. The bulk of service exchange units, usually represent the older designs and specifications that are more difficult to source than the current day generation.

The service exchange programme relies on the return of the original unit, with serviceable cast housings, therefore allowing the programme to continue. We are also technically capable of updating your old out of date equipment with new versions from the same manufacturer of supply cost effective replacements.  


Hydraulic pump and motor manufacturers covered

Atos Barnes Bosch
Brueninghaus Cassappa Caterpillar
Cessna Char-lynn Commercial
Daikin Danfoss Denison
Dowty Dusterloh Eaton
Hamworthy Hawke HPI
Hydac Hydraulic Ring Hydrokraft
Hydromatik Hydrostatic Transmissions Kawasaki
Komatsu Liebherr Linde
Mannesmann Rexroth Nachi Parker Hannifin
Permco Pleiger Poclain Powerteam
Racine Rexroth Rollstar
Salami Sauer Danfoss Sauer Sundstrand
Staffa Uchida Ultra
Valmet Van Roll Vickers Vane
Voac Voith Volvo
Wandfluh        

 

 
 
 
 
Alatas Latest News
ILO 152 renewal and certification
Inspections and ILO 152 certification
details...
Crane cabin replacement
Crane cabin replacement and general repairs
details...
Liebherr crane luffing cylinder repairs
Liebherr CBW crane luffing cylinder replacements
details...
Crane control system
Ship crane control system replacement
details...
Hose replacement
Hydraulic hose renewal on Liebherr offshore cranes
details...
Crane bumper bars protect lattice boom crane from hook strikes
Crane bumper bars protect lattice crane booms
details...
Dock crane
Critical Dock Crane slew bearing repairs
details...
Hagglund crane
MacGreor Hagglunds Gl2524-2 slew bearing replacementl
details...
MacGregor crane rope sheave changeout
MacGregor crane rope sheave changeout
details...
Searex crane
Commissioning of 210 tons Searex Omnilift Offshore Crane
details...
 
 
 
Alatas Offices & Service Stations
Alatas UK Ltd - Head Office
Arthur Drive, Hoo Farm Ind. Est. Kidderminster
WORCS DY11 7RA UK
Tel: +44 1562 747050
Fax: +44 1562 747053
Aberdeen Office, Units 7 & 8 Airways Industrial Estate.
Pitmedden Road, Dyce, Aberdeen AB21 0DT, UK
Tel: +44 1224 797232
Fax: +44 1224 797232
Houston Office, 22015, South Frwy.
Manvel, Texas 77578 USA
Tel: +1 281 431 0707
Fax: +1 281 431 0799
Sachsenring 11, D-27711 Osterholz-Scharmbeck
Bremen, Germany
Tel: +49 4795 957 1460
Fax: +49 4795 957 4102
2203 Winning Centre, 29 Tai Yau Street, San Po Kong, Kowloon, Hong Kong
Tel: +852 2153 2153
Fax: +852 2153 2163
Carretera Carmen-Puerto Real Km. 14.5
Cd. Del Carmen, Campeche. México, C.P. 24157
Tel: +52 (938) 68 8 52 60
Fax: +52 938 110 6823
Jebel Ali Free Zone - South, P.O. Box 263 007
Dubai United Arab Emirates
Tel: +971 4 885 7954
Fax: +971 4 885 7229

Kjøita 64630, Kristiansand,
Norway

Tel: +47 41448345
Fax: +47 TBC
C/O: Houston Office, 22015, South Frwy.
Manvel, Texas 77578 USA
Tel: +1 281 431 0707
Fax: +1 281 431 0799
1 Int'l Business Park #03-01E
The Synergy, Singapore 609917
Tel: +65 6861 2336
Fax: +65 6861 6261
Recapital Buiding 5th Floor, Jalan Adityawarman Kav.55, Kebayoran Baru, Jakarta Selatan, 12160
Tel: +62 21 7247679
Fax: +65 6861 6261
125 Ye Zhuang Road, Zhuanghang Town, Fengxian Qu, Shanghai, China
Tel: +86 1500 041 9194
Alatas on Facebook Follow Alatas on Twitter Follow Alatas on Google Plus Alatas You Tube Channel Alatsa Linkedin Share

 

 

  You are here: Home > Hydraulic repairs and gearbox repairs > Hydraulic Pump Sales